Alcoscan AL6000 is a hand held, portable breath alcohol tester to check subject's breath alcohol concentration with reliable accuracy and it is available to test in Passive mode.

What is a "Pre-Calibrated Replaceable Sensor Module"?

Sentech Korea is the first breathalyzer company to introduce pre-calibrated replaceable modules (patent-pending) to the market. One of the problems with using breathalyzers in critical applications is that the alcohol sensor requires periodic recalibration. Unfortunately, the recalibration process requires breathalyzer to be physically mailed or taken to a professional service center, at some point the device must be evaluated and proper steps must be taken for calibration with an expensive simulator system. The process is costly for both consumer and service center, and the delay of processing and shipping back-and-forth can be quite a loss. The Pre-Calibrated Replaceable Alcohol Sensor Module can eliminate the delays and complications of recalibration by allowing you to simply "snap out" an old module and "snap in" a new module. This way, you can get back to reliable, accurate testing in a matter of seconds!

SPECIFICATIONS

 -. Indication of B.A.C.:

 *Normal Mode: 0.00 to 4.00 ‰ or 0.000 to 0.400%BAC or 0.00 to 2.00 mg/l BrAC by LED display

 *Fast (Screening) Mode: “0”, “Low” and “High” 3 steps

 -. Sensor: Semiconductor type alcohol sensor

 -. Accuracy: ±0.01%BAC at 0.05%BAC

 -. Mouthpiece: Normal Mode : use / Fast Mode: No use

 -. Power: Two 1.5V "AA" size alkaline batteries / Auto Power off         

 -. Weight: 115g (Including batteries)

 -. Dimension(mm): 124 (height) X 56 (width) X 41 (thickness) MAX

 -. Audible warnings: 3 steps beep warning of alcohol detection with LED display

 -. Available colors: Silver / Red

 -. Certificate: CE, FDA 510K listed, DOT, Australian Standard