■Perfect oil film removal - Solving the root cause of fogging
During the manufacturing process of diving masks, a fine silicone oil
film (oil film) is created on the lens surface when the silicone skirt is bonded.
The oil film remover cleanly removes this oil component, grease, and even manufacturing residue, eliminating the root cause of fogging
and maximizing the anti-fog effect.
■ Lens-specific formula - Safe for high-quality optical surfaces
Consists of neutral cleaning ingredients that can be used on various lens materials such as tempered glass and polycarbonate
Selectively removes only the oil film without damaging the lens coating.
Can be used on various equipment such as diving masks, goggles, and waterproof goggles.
■ Maximizing anti-fog performance - Essential pre-work
If the oil film is not removed, fogging will easily occur even when using a high-performance anti-fog.
The oil film remover is used before applying the anti-fog, laying the foundation for the anti-fog to adhere to the lens
.
It is especially recommended to use it when using a new mask for the first time.
■Domestic manufactured and certified product - Safety and
This is a domestically manufactured product that has been registered by meeting the chemical product safety management standards and is manufactured in a production environment that holds ISO 9001 / ISO 14001 certification, so it is a reliable product that has secured both quality stability and environmental safety.
■ Simple to use - Apply evenly to care for the entire lens.
Simply rub the inside and outside of the lens in a circular motion with your finger or a soft cloth to remove oil and impurities at the same time.
After rinsing, it can be easily used by anyone with the simple method of drying in the shade.

During the manufacturing process of diving masks and goggle lenses, a fine silicone oil film
(oil film) is created when the silicone skirt is attached.
This oil film prevents the anti-fog agent from properly adhering to the lens and is the main cause of significantly reducing the anti-fog effect.
Oil Layer Remover is an essential product for preparation that thoroughly removes this oil film, manufacturing residue, grease, etc., cleaning the lens surface in the best condition and maximizing the adhesion and long-lasting effect of the anti-fog product.
■ Perfect oil film removal - Solves the root cause of fogging
Cleanly removes silicone oil film, grease, and residue generated during the manufacturing process to restore the lens surface to a clean state
and lays the foundation for the anti-fog to be effective.
Blocks the root cause of fogging, contributing to maintaining clear vision for a long time.
■ Lens-specific formula – Safe design for advanced optical surfaces
The formula, composed of neutral cleaning ingredients, is designed to selectively remove only oil components without damaging the lens coating. It can be used on most lenses, including tempered glass, polycarbonate, and mirror lenses.
■ Enhanced anti-fog performance – Essential pre-treatment solution
Even high-end anti-fog products can lose their effectiveness without removing the oil film.
When used as a pre-cleaner before applying anti-fog products, the oil film remover improves adhesion and coating uniformity → improves the duration of fogging prevention.
■ Domestic manufacturing and international certification – Reliable quality
It is produced in a manufacturing facility that meets the standards of the Chemical Product Safety Management Act and has obtained ISO 9001 (quality) / ISO 14001 (environment) certification, ensuring safety, sustainability, and consistent quality control.
■ Simple to use – Anyone can use it easily
After applying a small amount to the inside and outside of the lens, gently rub it in a circular motion, and rinse it.
After rinsing, dry it in the shade. It is intuitive and easy to use, so even beginner divers can use it easily.