▣ CONTENTS : 2g X 4EA
▣ Application method
1. Before the application
① Check the expiration date and be cautious of the package contaminated.
② Follow the instructions before using it.
③ Before the procedure, when the patient is ready, remove the cap of the product and connect the tip
④ Be sure a protection device for the respiratory before the procedure.
2. Application
① Clean and dry the cavity.
② For pretreatment of the tooth surface, apply etching agent and bonding system according to the method of use of the product in use.
③ Apply Any-Com Flow
④ Apply the curing light as like below,
- Curing Time of 900㎽/㎠ stand curing unit : 10 sec
- Curing Time of 540㎽/㎠ stand curing unit : 20 sec
- If 450㎽/㎠ stand curing unit:, Please extend the use time.
⑤ If Cavity is more than 2mm deep, please restore Any-Com Flow divided by 2mm on the cavity
⑥ After restoration, polish with polishing instrument.
⑦ Remove the used tips and keep tightly closed.