Semi Rounded Neck Joint

The guitar features a bolt-on neck joint secured with four bolts. To make playing on the higher frets easier, a semi-rounded neck joint with smoothed edges is used. Each bolt is precisely sized and has an appropriate thickness for the neck joint, and the tightness is finely adjusted to prevent any unwanted stuffy sound.


TESLA 70s Pickup Set

The TESLA 70s pickup set is designed with a focus on versatility, covering a wide range of genres with high resolution and powerful yet clear tones. It features premium-grade wiring, high-quality capacitors, and reliable pots and pickup selectors, as well as advanced wiring to enhance the player's sound satisfaction. The pickups are made in Korea and have undergone a high-quality process, including the use of American wire, premium-grade bobbins, high-grade magnets, and advanced wax potting.


TESLA 70s Neck and Middle Single Pickups

Due to the hand-wiring and scatter-winding of the coil, it delivers a vintage and sophisticated sound with thick and smooth mid/low tones and strong high tones.


The pickups use Alnico 5 polepiece magnets and Heavy Formvar Copper Wire to deliver rich and clear sound with excellent harmonics to the player.


* Neck: 6.0 KΩ D.C.Resistance / 5.8 kHz Resonant Peak / 50mm Spacing / Mid Output Level

* Middle: 6.0 KΩ D.C.Resistance / 5.8 kHz Resonant Peak / 52mm Spacing / Mid Output Level

TESLA 70s Bridge Humbucker Pickup

It is carefully made with American made plain enamel copper wire and bar type Alnico 5 magnets with cloth covered leads and braided shield.


The coils are wax potted for stabilization to insure the complete, clean reproduction of sound.


* Bridge: 8.0 KΩ D.C.Resistance / 7.2 kHz Resonant Peak / 52mm Spacing / Mid-high Output Level