This equipment is to remove stagnant water after raining during shipbuilding process and operated by compressed air (Electricity is not required)
This cleaner can suck water from 100m (horizontal) or 20m (vertical) distance using a soft hose with 50mm of internal diameter.
Water sucked through the cleaner is detected by a float automatically and drained through bottom cover opened by the operation of bottom cylinder.
After the bottom cover is closed by the timer, suction is resumed (drain time: 2~3 seconds).

- Serviceable power: Compressed air (7kgf/cm2) – Electricity is not required
- Low noise during operation (75db)
- Low failure rate due to the absence of rotational parts
- Strong and high durability
- Compact and light for better mobility
- Easy to install after moving
- Continuous operation with automation system (open / close water discharges automatically)
- The bore of compressed air hose for operation: 1” or bigger